It’s All in the Details
________________________________________

The exteriors of each Hill Country Classics Custom Home are of Hardiplank™ lap siding, cedar, stucco and of course, native stone. Native stone has long been the basic building component of Hill Country homes since the early Texas pioneers first settled our area.  Not only do they blend well with the Hill Country surroundings, but also resist the extreme Texas elements.

________________________________________

FOUNDATION:
click below to view typical wall sections

Pier and Beam Foundation / Sided Exterior
Concrete Slab Foundation / Masonry Exterior

Pier and Beam:
10” drilled and poured concrete pier footings, doubled 2” x 10” treated Y.P. sill beams and 2” x 8” floor joists 16” o.c. with 4’ x  8’ 3/4” tongue and grooved plywood subflooring.

Concrete Slab:
Steel reinforced engineered concrete slab inspected for compliance by licensed and registered structural engineer prior to concrete placement -  
Typical 3000 psi concrete mix - 4 mil. poly vapor barrier - foundation elevation 10” (min) from ground level with #6 rebar @ grade beams and #4 rebar matted 16” o.c. @ top

 

INTERIOR WALLS:

2’’ X 4” studs #2 or better SPF 16” o.c., 8’ plate heights -
(9’ optional)

 

EXTERIOR WALLS:

2”x 4” studs #2 or better SPF 16” o.c. - 2”x 6” headers and double top plates, 8’ plate heights throughout - (9’ optional) - (2” x  6” exterior wall framing optional)

 

EXTERIOR SHEATHING:

Sided Walls: ½” CDX plywood sheathing w/ TYVEK HomeWrap™ moisture barrier
Masonry Walls: 1/2” moisture proof gypsum board w/TYVEK HomeWrap™

 

EXTERIOR SIDING:

Standard: HardiePlank™ fiber cement lap siding
Optional: Cedar siding and stucco

 

EXTERIOR TRIM:

2”x 6” rough cedar facia, window and door trim 2” x 4” rough cedar

 

FIREPLACES:

Full masonry: 42” Heatilator firebox with all masonry constructed flue and natural stone veneer chimney and interior facing
Insert firebox: Deluxe 41” insert w/native stone veneer
facing and chimney

 

CEILING JOISTS:

2” x 6” #2 or better SPF 16” o.c.

 

ROOF RAFTERS:

2” x 6” #2 or better SPF 16” o.c.

 

ROOF DECKING:

Metal Roofs & Composition Shingle Roofs: 1/2” CDX
plywood w/ radiant barrier roof decking and 30# felt overlaymant

 

ROOFING MATERIALS:

Metal Roofs: 29 gauge 5-V Crimp Galvalume™ steel or 26 gauge Galvalume™ steel standing seam
Composition Shingle Roofs: 240# -30 year dimensional fiberglass/asphalt-Elk Prestique II or equivalent

 

ROOF VENTING:

Soffit, ridge and gable vents

 

WINDOWS:

Single hung aluminum - divided lite, double pane, Low “E” glass with half screens - Frame color: Tan, white or bronze

 

EXTERIOR DOORS:

6’8” x 1 3/4” insulated metal, wood or fiberglass with aluminum threshold with weather-stripping and deadbolt locks for security - sized per plan

 

INSULATION:

Standard: Exterior Walls - R-13 fiberglass batts - 3 1/2” thickness
Ceilings: R-30 fiberglass batts - 10 1/2” thickness
Polycell foam caulk at all windows and exterior
penetrations.

 

ELECTRICAL:

200 amp service 40 breaker panel box, 220 V. circuits. All copper wiring - all bedrooms prewired for ceiling fans - includes TV and telephone prewire
(Does not include meter loop)

 

PLUMBING:

40 gallon water heater, lavatories & water closets, PEX water lines and p.v.c. drain lines, Aqua-glass tub/shower stalls or cast iron bathtubs/showers with ceramic tile walls - finish fixtures include stainless steel kitchen sink and all Moen or equivalent bathroom fixtures

 

HEATING AND AIR CONDITIONING:

Forced air, insulated ductwork, auto thermostat, Trane High Efficiency equipment, 14.00 SEER or better, includes duct work to all walk-in closets and bath areas

 

INTERIOR DOORS:

Standard: Stain grade birch with stain grade jambs
Optional: Stain grade 6-panel pine with stain grade jambs

 

INTERIOR WALL FINISH:

Standard: 1/2” drywall taped and floated with Monterrey texture - 5/8” at ceilings
Optional: 1” x 6” rough sawn or smooth finish kiln dried tongue and groove cedar walls

 

INTERIOR TRIM:

1” x 4” custom cedar/pine base and door trim - window stools
to match - or mill run pine colonial style trim - paint or stain grade

 

KITCHEN CABINETS & BATHROOM VANITIES:

Knotty pine, hickory or oak door fronts and all wood base units – All cabinets custom built and designed per plan

 

COUNTERTOPS:

Kitchen drainboards and baths: Laminate counters with coved backsplashes. Tile, granite, Silestone and Solid surface are optional

 

FLOOR COVERING:

Owners’ choice per individual allowance – HCC offers typical carpet, vinyl, ceramic tile, laminates, wood and stained concrete floors

 

FINISH LIGHT FIXTURES/ BUILT-IN APPLIANCES:

Owners’ choice per allowance

________________________________________

 

 © 2009 Hill Country Classics |  Toll-Free (866) 924-5888 * San Antonio (830) 816-3330 * Boerne (830) 249-2920 * Fax (830) 249-2155
Texas Hill Country Ranches | design & hosting by Penguin Suits, Inc.                                                                               photo by Katie Birk